Allied Vision Technologies Pike Manual de Instruções Página 19
- Página / 332
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
PIKE types and highlights
PIKE Technical Manual V4.0.0
19
Operating in 8-bit and 14-bit mode, the cameras ensure very high quality
images under almost all circumstances. The Pike is equipped with an asyn-
chronous trigger shutter as well as true partial scan, and integrates numerous
useful and intelligent Smart Features for image processing.
PIKE F-210B/C
PIKE F-210B/C fiber
Type 1 KODAK KAI-2093
Progressive Scan CCD imager
1920 (h) x 1080 (v) Up to 31 fps
PIKE F-421B/C
PIKE F-421B/C fiber
Type 1.2 KODAK KAI-4021
Progressive Scan CCD imager
2048 (h) x 2048 (v) Up to 16 fps
PIKE F-505B/C
PIKE F-505B/C fiber
Type 2/3 SONY ICX625
Progressive Scan CCD imager
2456 (h) x 2058 (v) Up to 15 fps
Note
L
•All color models are equipped with an optical filter to
eliminate the influence of infrared light hitting the
sensor. Please be advised that, as a side effect, this fil-
ter reduces sensitivity in the visible spectrum. The opti-
cal filter is part of the back focus ring, which is
threaded into the C-Mount.
• B/w models come with a sensor protection glass
mounted in the back focus ring.
• Changing filters is achieved by changing back focus
rings with the appropriate filter already mounted.
Please be advised that back focus adjustment will be
necessary in order to match C-Mount distance of
17.526 mm after changing back focus ring. Ask your
dealer for further information or assistance.
Warning
a
Mount/dismount lenses and filters in a dust-free environ-
ment, and do not use compressed air (which can push dust
into cameras and lenses).
Use only optical quality tissue/cloth if you must clean a
lens or filter.
Pike type Sensor Picture size (max.)
Format_7 Mode_0
Frame rates,
full resolution
Table 4: PIKE camera types
- Technical Manual 1
- AVT Pike 1
- Legal notice 2
- Contents 3
- Introduction 10
- Before operation 13
- Declarations of conformity 14
- *: also -15fps variant 15
- Safety instructions 16
- Cautions 17
- Environmental conditions 17
- PIKE types and highlights 18
- FireWire 21
- FireWire in detail 22
- 1394b bandwidths 27
- FireWire hot plug precautions 31
- Operating system support 31
- System components 32
- Camera lenses 34
- Specifications 36
- PIKE F-032B / F-032B fiber 37
- PIKE F-032C / F-032C fiber 39
- PIKE F-100B / F-100B fiber 41
- PIKE F-100C / F-100C fiber 43
- PIKE F-210B / F210B fiber 49
- PIKE F-210C / F-210C fiber 51
- PIKE F-421B / F-421B fiber 53
- PIKE F-421C / F-421 C fiber 55
- PIKE F-505B / F-505B fiber 57
- PIKE F-505C / F-505C fiber 59
- Spectral sensitivity 61
- Camera dimensions 67
- Tripod adapter 69
- Pike W90 (2 x 1394b copper) 70
- Pike W270 (2 x 1394b copper) 74
- Adjustment of C-Mount 81
- F-Mount, K-Mount, M39-Mount 82
- PIKE fiber 84
- Status LEDs 90
- Operating the camera 92
- In1 – Pin 4 94
- In2 – Pin 11 94
- InGND – Pin 7 94
- PIKE Technical Manual V4.0.0 100
- Camera interfaces 102
- Pixel data 107
- Description of the data path 110
- Color cameras 111
- Channel balance 112
- White balance 115
- Automatic white balance 118
- Auto shutter 119
- Auto gain 121
- Manual gain 123
- Horizontal mirror function 125
- Shading correction 126
- How to store shading image 127
- Output = f (Input) 133
- Write n databytes 134
- 2 x / 4 x / 8 x binning 135
- Vertical binning 136
- Horizontal binning 138
- Figure 75: 8 x full binning 141
- 8 x full binning 141
- What is sub-sampling? 142
- Description of sub-sampling 142
- 2 out of 16 H+V sub-sampling 146
- Why new timing modes? 151
- ☺ Disadvantage 153
- Packed 12-Bit Mode 156
- Deferred image transport 157
- HoldImg mode 159
- FastCapture mode 161
- (BAYER demosaicing) 162
- Sharpness 163
- Hue and saturation 164
- Color correction 165
- Color conversion (RGB YUV) 167
- Bulk Trigger 167
- Level Trigger 167
- Serial interface 168
- Controlling image capture 173
- Trigger delay 178
- Exposure time 180
- Minimum exposure time 181
- Extended shutter 181
- One-shot 183
- Exposure 185
- Multi-shot 186
- ISO_Enable / Free-Run 186
- Asynchronous broadcast 186
- Jitter at start of exposure 187
- Sequence mode 189
- SetupMode to 193
- Disable SetupMode 193
- SIS: Definition 198
- SIS: Scenarios 198
- Smear reduction 200
- PIKE F-032B / PIKE F-032C 201
- PIKE F-100B / PIKE F-100C 203
- PIKE F-210B / PIKE F-210C 207
- PIKE F-421B / PIKE F-421C 209
- PIKE F-505B / PIKE F-505C 211
- Area of interest (AOI) 213
- Autofunction AOI 215
- Frame rates 216
- Frame rates Format_7 220
- PIKE F-032: AOI frame rates 221
- PIKE F-100: AOI frame rates 223
- (no sub-sampl.) 229
- (sub-sampl.) 231
- AOI height / pixel 232
- Frame rate / fps 232
- PIKE F-421: AOI frame rates 236
- PIKE F-505: AOI frame rates 238
- Test images 243
- Test images for color cameras 244
- Configuration of the camera 245
- Sample program 249
- Example FireStack API 250
- Configuration ROM 251
- Implemented registers 254
- Format_7 276
- Advanced features 278
- Advanced feature inquiry 283
- Camera status 285
- Maximum resolution 286
- Time base 286
- Look-up tables (LUT) 290
- Frame information 297
- Input/output pin control 297
- Delayed Integration enable 298
- Auto shutter control 299
- Auto gain control 300
- Mirror image 304
- Soft Reset 305
- Parameter-List Update 309
- Format_7 mode mapping 310
- Secure image signature (SIS) 312
- User profiles 317
- GPDATA_BUFFER 320
- Firmware update 321
- Appendix 322
- PIKE Technical Manual V4.0.0 332
- , 117, 118 332
Manuais e produtos relacionados com Câmaras bridge Allied Vision Technologies Pike
(49 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais